| PPS PPS-HMR60 四川得阳科技股份有限公司 物性数据 |
| 规格级别： | 填充增强级 | 外观颜色： | --- |
| 用途概述： | 制作连接器、接插件、汽车灯座、耐高温电器外壳、螺帽螺栓、电器接触板、射灯灯座、灯碗。 | ||
| 备注说明： | 60%填充增强聚苯硫醚粒料 | ||
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | ||||||||
| 基本性能 | 密度 | --- | --- | 1.94 | g/cm3 | |||||||
| 物理性能 |
|
--- | --- |
|
|
|||||||
| 机械性能 | 洛氏硬度 | --- | --- | 96 | --- | |||||||
| 拉伸强度 | --- | --- | 164 | MPa | ||||||||
| 断裂伸长率 | --- | --- | 2.5 | % | ||||||||
| 弯曲强度 | --- | --- | 244 | MPa | ||||||||
| 弯曲模量 | --- | --- | 1.63×104 | MPa | ||||||||
| 压缩强度 | --- | --- | 160 | MPa | ||||||||
| 悬臂梁缺口冲击强度 | --- | --- | 12 | kj/m2 | ||||||||
| 电气性能 | 体积电阻率 | --- | --- | 8×1013 | Ω.m | |||||||
| 表面电阻率 | --- | --- | 3×1014 | Ω | ||||||||
| 介电常数 | 1MHz | --- | 5.0 | --- | ||||||||
| 介质损耗因数 | 1MHz | --- | 0.010 | --- | ||||||||
| 电气强度 | --- | --- | 14 | KV/mm | ||||||||
| 相比漏电起痕指数 | --- | --- | 125 | --- | ||||||||
| 热 性 能 | 溶点 | --- | --- | 288 | ℃ | |||||||
| 热变形温度 | --- | --- | 270 | ℃ | ||||||||
| 阻燃性 | --- | UL-94 | V-0 | --- | ||||||||